These are suggested Screen Room Component Prices.
Aluminum screen rooms are fairly basic structures. They are built with three types of extrusion, screen and doors.
Kick plates can be added around the bottom of the screen room. These can be made out of many different types of material.
The 2 x 2 is used for all of the basic framing. The screen grooves are built into this material so it is just a matter of getting them all facing the same direction.
The 1 x 2 is used for adding a screen groove into places like corners and up against walls.
The slip channel has many uses. All of the clips used to attach the 2 x 2 are made with this. The slip channel can also be used along the entire top and bottom of the room. The 2 x 2 goes into the slip and is attached.
Check with Mobile Home Parts & Supplies for all of your mobile home needs.
|1" x 2" Screen Extrusion||Anodized||50||24'||1.725||FT|
|(Round Spline- #220)||Cameo||60||24'||1.755||FT|
|2" x 2" Screen Extrusion||Anodized||51||24'||3.038||FT|
|(Round Spline- #220)||Cameo||61||24'||3.060||FT|
|1" x 2" Slip Channel||Anodized||52||20'||1.493||FT|
|(Use For Clips & Adjustment Channel)||Cameo||62||20'||1.508||FT|
|18 x 16 Fiberglass Screen||0.426||SF|
|(Roll Pricing Available-See Page 43 & 44)||1506||60"|
|Round Screen Spline||0.122||FT|
|(1000' Rolls)||Black||1562||# 220|
|(Roll Pricing Available-See Page 44)|
|Prehung Screen Doors||Mill||180.371||EA|
|Prehung Screen Doors||Bronze||214.381||EA|