Above Ground Pool Manufacturer

by Cheryl
(Sunshine Stae )

Hello there, I have recently bought a used 16' x 32' above ground pool. As we were taking it down we noticed the radius part of the pool was all rusted really bad. Not even salvageable.

So we thought no problem, someone somewhere sells these parts. NOPE,not that I can find and I have looked for 5 days. I do not know what company made this pool and I have been from California to Canada (on the internet) searching for the parts and maker. I sure hope you can help us out. Thanks a bunch ,Cheryl



Hi Cheryl. A 16' x 32' is a Doughboy or Lomart size so it is probably a Doughboy. If that is the case all the bottom rails will be stamped on the inside of the arc. The ends will be stamped 16, the sides will have an S on them and the four corners will have a TR.

The bottom rails are the one part that are the same regardless of pool model so you should be able to order them from any Doughboy dealer.

Another way to tell if it is a Doughboy pool is to look inside the wall and see how it is connected. A Doughboy 16' x 32' pool will have two separate wall panels. They will usually be connected with a metal bar. If that big roll consists of two separate wall then it's a Doughboy.

This page talks more about above ground pool manufactures.

Above Ground Pool Manufactures