Parts for Esther Williams Pools

Esther Williams Hopper Liner

I have an 18' x 33' Ester Williams Pool with a hopper, or deep end. I am having trouble getting a liner.

Is there some way to get a diagram so that I can get the measurements or is there a specific way to measure for the liner and where I can get a liner?



Hi. Most above ground pools with deep ends use an expandable overlap liner where exact measurements are not necessary. These liners are made to stretch into any size and shape of deep area you have.

If you have a beaded liner, which you probably do, exact measurements are critical. I used to measure and have custom liners made for in ground vinyl lined pools so I know the importance of exact measurements.

If you are looking for a beaded liner with a hopper you are probably going to have one custom made. Who ever does this for you will provide you with a diagram for you to work off of. There are many measurements required before they will even start to make a custom liner. So the first step is finding a company to work with who will be able to make this liner for you.

In The Swim makes custom liners, they would be a good place to start.

Comments for Parts for Esther Williams Pools

Click here to add your own comments

May 16, 2013
Top rails for Esther Williams 18x52 pool
by: Anonymous

I am looking for replacement top rails for an above ground Esther willimas pool. It is 18x 52 in size. Round.
Some of the rails are rusting but because they no longer make Esther Williams it's been hard finding them....
Any suggestions would be great!!

May 28, 2014
pool liners
by: mrraider51

I just had a liner made for my pool by Findlay Vinyl. I lost the paper work but I'm sure you can find them by Googleing the name. 20' X 12' X 48" only ran me a little over $400. Not to bad & the liner fits fine. If I find paper work I will post info.

Jun 18, 2014
pool liner back on tract
by: dawn

I have a carnival 24'. A small part of the liner cane off tract. I also have a walk around deck from you. How do i get it back on tract?
thank you
dawn

Aug 19, 2015
parts for Esther Williams pool
by: Nancy

I have an Esther Williams pool that is approx 30 years old and need coping covers both rear and front for an 18x33 oval above ground pool. Do you carry this part or know where I may get them?

Mar 24, 2017
Esther williams 24' pool
by: Andy

We have a 24' Esther Williams pool from 2000. We are second owners and have no documentation or further info on pool. We recently found an 1 1/2 inch hole in the side and other smaller holes lower.

1. Can this be fixed?
2. If not, does anyone know of what the actual dimensions are for a pool of this era? Ours was thought to be 4ft deep but i assume that makes the dimiensions of the sides actually 52"? Ours is buried in ground anywhere from 6 inches to 24 inches depending on area due to slope of yard.

If wr can fix we would replace with like size but want to make sure we have the right size since we have a deck around 1/4 of the pool and want the height to match existing eheight of deck.

If there are other options I am open. Thanks

Apr 03, 2017
Coping Cover Plugs
by: Dottie

We recently replaced the liner in about a 10-12 year Esther Williams Pool and when the installers took the Coping Covers off of the top of the pool, the plugs fell apart and am trying to locate replacements for those. The covers are fine...just need the plugs. Thank you if anyone can help!

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Esther Williams Bottom Rails

by Tracy Erie
(PA)

I have a 20 yr old Esther Williams pool. Need to replace corroded bottom rails. Where can you get them. Don't want to replace the whole pool. The new ones can't compare to the construction of this one.



Hi Tracy. The best place I know to find Esther Williams Pool Parts is Teddy Bear Pools. Give them a try.

Comments for

Esther Williams Bottom Rails

Click here to add your own comments

Jun 22, 2014
Re: Bottom Rails
by: Anonymous

Or william Wertz pools in Juniata Gap, PA. I got mine there.

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Ester Williams 16x30 Rectangular Pool

by Jeff
(Hillsborough,NJ USA)

Does any one know where I can buy the supports that hold the fence up around the pool. I had a branch take out about 4 of them.
Thanks Jeff

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Ester Williams Above Ground Pool Fencing

by JERRY ADAMO
(WASHINGTON TOWNSHIP, NEW JERSEY)

Any idea where I can find the aluminum fencing that was used on old Ester Williams above ground 15x30 pool with the deck at one end? I had a tree fall on one end and the fencing was smooched. I also need two posts.

thanks, Jerry

GEREMIAADAMO@HOTMAIL.COM

Comments for

Ester Williams Above Ground Pool Fencing

Click here to add your own comments

Jun 23, 2017
Pool parts
by: Eddie from Oklahoma

I have plenty of that white fence panels and post I bought a used pool for parts if you need I will ship some to you, call me at 405-240-7318

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Top Rails For Ester Williams Pool

by Steve
(Rochester, NY.)

This is an older Esther Williams pool, estimate that it was installed in the 1980's by previous owners, top rail around pool is starting to fall apart, wondering if i can get new rail for this? Its the older 27' round, yellow and white.



Richard added
Try teddybearpools.com

They have all the EW parts left and are very knowledgeable in EW pools. I use them for parts for my 18x33 EW Millennium pool.

Hope it helps, Richard

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Ester Williams Base Plates

by Ross
(berlin nj )

I have a Ester Williams 18' round pool. I am looking for the base plates that mounts the uprights to the round bottom track.I need 8 plates and 12 bottom tracks.



by: Anonymous

Just wondering if you ever found a place to purchase these. We are looking for the plates as well.

Comments for

Ester Williams Base Plates

Click here to add your own comments

Jun 25, 2016
Craigslist
by: Anonymous

Try craigslist....I am selling my pool for parts right now on Craigslist

Oct 12, 2016
ester Williams pool
by: Sue

My Ester Williams pool is starting to buckle. I have the Lady Ester pool. I had someone come out and look at it and said if the bands are gone the pool is not repairable. Do you know if the bands can be fixed or replaced?

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Ester Willilams Wall Channels

by Bob Reynolds
(Rising Sun, MD USA)

I am trying to identify where I can purchase the ten (10) wall channels for my Ester Williams 15 x 30 oval pool. I have tried just about everywhere with no luck. PLEASE HELP!!



re: wall channel
by: Anonymous


This company will have what you need /nemo pools york,pa. 717-755-2109

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Ester Williams Top Ledge Coping

by Bob Kalbacher
(Phila., Pa. USA)

Aluminum Top Ledge

Aluminum Top Ledge

Aluminum Top Ledge Ester Williams Top Top Rail Close Up of Top Ledge

I have an old Johnny Wiesmuller/Ester Williams 12' x 20' rectangular above ground pool with a 2' deck all the way around the pool. I am looking for the plastic coping that snaps into an aluminum channel. I will add some pics so you can see what I am looking for. Keep in mind the pool was seven years old when I bought my house in 1972. Any help would be truly appreciated. I have more pics if you need them

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Need Replacement Wall

by Leslie
(Memphis, TN)

I have an old Esther Williams 15 x 30 oval pool. Not sure the model though. Anyway, I need the replacement wall only (the wall split due to pin holes). Please advise if you know where I can purchase OEM wall or if any 15 x 30 x 52 wall would work. Thanks,
Ljones8035@aol.com

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Esther Williams Deck Carpeting

by April

I have a Lady Esther above ground pool in desperate need of new carpet for the deck portion. I don't have a lot of info about the pool as it came with the house we bought. but it is a 15,000 gallon rectangle 16' X 30'. Any idea where I can get a replacement carpet for this pool? Thank You.

Comments for

Esther Williams Deck Carpeting

Click here to add your own comments

Jun 23, 2016
Replacememt carpet
by: Anonymous

We bought ours at Lowes. Just give them the size. We had to make cuts to fit but looks great. Tip. Be sure to get old glue completely off and cleaned. Then glue back down.

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



5/8" Bottom Wall Channel

by Joe
(New Bern, NC)

Where can I find 5/8" bottom channel for an Esther Williams pool?

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Porch Railing Caps

I am in need for some items for a esther Williams above ground pool 24' round. First is we have a porch all the way around it and we are missing all of the square caps that go on top railing poles. Please we only found small ones not medium.

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Panel for Esther Williams Pool

by Charmaine
(Canton NY)

Where can I purchase panels for my Esther William above ground pool? It is about 25-30 years old. Yellow and white.

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Esther Williams 15x24

Esther Williams Top Rails

Esther Williams Top Rails

Esther Williams Top Rails Esther Williams Pool Esther Williams Bracket Esther Williams Post

Due to storm damage, I am looking for repairs to my pool, including 5 posts, 4 long railings, 2 short railings, 5 2part aluminum capping, 5 brackets, 13 plastic caps for posts.

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



EW Strap Kit

by John
(Boaz, AL, usa)

Looking for a wall strap kit (2pk) 52" for EW or JW ABG Pool.

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Ester Williams In Ground Pool Metal Coping

I have an Ester Williams inground pool installed in 1993 that has some rusting areas on the top coping. A magnet does not stick to this coping so I don't know if it is stainless or aluminum but neither should rust. How difficult is it to replace the coping?

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Top Pool Rails

by Dan Carr
(Levittown Pa 19055)

Hello I have a 15x24 Ester Williams pool looking for the top rails. I guess that is what they are called, it is the top flat part of the pool. Mine are all weathered and look bad. Have to replace them can't paint them or can I?

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



In search of 48" aluminum wall slats for my Esther Williams pool

by Danielle
(Braintree, MA)

Hi,

I am in search of 48" aluminum wall slats for my Esther Williams pool. I contacted Teddy Bear Pools, but they only have 52" slats. They said they could be cut down to size, but that the pool installer would have to do that. I don't live close enough to Teddy Bear for them to do it and my pool guy doesn't feel comfortable doing it and I don't know of any other pool company that would.

Does anyone have any suggestions?

Thank you,
Danielle

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Replacement Top Rails for Round Pool

by Michele
(Havertown Pa )

I have an above ground 18 round Esther Williams pool that is probably 18 plus years old. I am looking to replace the top rails ( or at least some of them).... They are aluminum, and a couple are so rusted through they are disintegrating.....
I have had no luck finding these parts, but keep trying....
Any suggestions are welcome!!

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Ester Williams Oval Top Rails

by Bill Lavertry
(Aston pa)

Looking for top rails and connectors for my Oval above ground pool by Ester Williams

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Esther Williams Bottom Rails

by Lisa

Hi I am needing to replace the bottom rails on a Esther William classic oval pool 15 x 30 x 52. An idea what other company's rails will work for me?

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Esther Williams Pool Parts

by Janice
(Michigan)

Storm took out one post and pool split open, need wall, bottom and top channels for wall to replace any where to just purchase this??

The frame and supports are all good.

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Homeowner (Bill)

by Bill
(Kansas)

I am searching for coping covers for a 1994 Esther Williams 18'x 34'above ground pool. Any suggestions on sources appreciated.

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.



Esther Williams Inground Corner Liner Clips

by Sherri Oaks
(Independence, MO)

corner piece

corner piece

corner piece clip

We are installing a new liner and the installers say the old clips no longer work. They said the part is no longer manufactured and we need 8 in order for our corners to be installed properly. The part has No 1938 stamped on it and the corner piece of the pool has Corinthian stamped. We need 8 if you know where we can obtain them.

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.