Hole in Pool Sidewall

by Christina
(Apple Valley, CA)

We bought a used 24' round above ground pool and put the frame up only to find out that the liner had holes in it, we ordered a new liner, and while we were waiting for the new liner to arrive we had a very bad wind storm that knocked the frame down and bent the metal wall. When we picked it up we noticed in one of the places that it bent and left a small hole. Is there any way it can be repaired?


Hi Christina. Holes in a sidewall can easily be repaired. What you are describing could probably be taken care of with just tape or aluminum tape. Another way to fix it would be to tape a piece of aluminum, or metal over the hole. A piece of flat stock about the size and thickness of the base of a pie pan is just fine. In a pinch I have made repair patches out of cookie sheets, pie pans and a beer can. It just takes a pair of tin snips. Hardware stores also carry 12 and 18 inch flat stock that is used for bending into fascia wraps and other types of house trim.

These are a couple pages of related reading that might be helpful.
Pool Wall Repair
Pool Wall Rusted