Installing Pool On Concrete
by Steven
(Bronx, NY)
Can I have a pool installed on concrete.
If so, what Type of pool? An Intex or regular steel wall pool.
Also, if I can install on concrete how can I make that area level? There is a slight pitch there for drainage.
Thanks, Steve
Hi Steve. An Intex Pool would install nicely on concrete, all you would need would be a pool pad of some sort to set it on. The only problem is that there is no way I can think of to level the area.
Installing a standard steel wall above ground pool on un-level concrete, however, is pretty easy. Once the bottom rail and footplates are assembled roofing shingles can be placed under the track as levelers. It's best to use a transit while doing this so that the pool turns out perfectly level.
The shingles allow you to raise and lower the bottom rail gradually simply by adding and removing the layers of shingle used. I recommend leaving enough shingle on the inside of the pool to support the preformed pool cove you should be using.
Using preformed pool cove and a pool pad when installing a vinyl lined pool on concrete is highly recommended. If the level is not to far off this would work fine. If you are talking inches off, you might consider bringing in sand for the pool base. Doing this would allow you to level the interior of the pool as well as the outer rim. It's the outer rim that's critical, but the liner will install better if the pool base is level also.
Pool Cove and Foam Pads
Click here to post comments.
Join in and write your own page! It's easy to do. How?
Simply click here to return to Above Ground Pool Base.
|