Leaking Filter

by Ty

I have a 27 foot round 52 inch deep, probably 48 inches of water, and a wondering what model Jacuzzi laser filter I need. Is model 192 ok? I hooked up all my hoses to my filter and when the filter is full, water runs out by the connection on filter where normally you do your backwash. I have tried filter positions rinse, winterized and drain and it leaks in all positions.



Hi Ty. Your filter is plenty adequate for you pool. Be sure you give it enough run time each day. The hotter it gets the longer it needs to run. If your water ever turns cloudy or green, run the filter until the water is clear again.

The leaking is probably caused by a bad spider gasket in the head assembly. Changing it is very easy. Before you take the screws out make a mark on the side of the assembly so that you will know exactly how the top goes back on. Being off by one screw hole messes up the entire operation of the filter.

When the screws are out of the valve assembly, lift the top off. The rubber spider gasket can be taken out. Take this to the store with you and match it up with a new one. Get some aqua lube while you are at the store. Lubricate the gasket before inserting it into the valve. With the gasket in place realign the top and insert the screws. This should take care of your leak problem.