Leveling Pavers for an Above Ground Pool

by JW
(Rock Hill, SC)

What is the easiest way to dig out for the pavers? Can sand be used to assist under the pavers in leveling? Where I live the ground is like concrete; if that makes a difference.
many thanks



Hi JW. Sand is an excellent leveler under the patio blocks for the supports of an above ground pool. Be sure to pack back in around the blocks with dirt so the sand does not have a chance of washing out.

Having ground that is like concrete does not make the job very easy. It sometimes just makes more sense to dig a larger hole and then fine tune it with sand. It is much easier to work with. I always lay the track out first so I know exactly where each block needs to go. Then the track can either be moved out of the way while you dig or pick away, or someone can hold it in the air while you work.

Do not, however, use the sand to level the area between the blocks, where the rails will sit. If this area needs to be over dug it is best to fill back in with crushed granite or crusher run material.

If the ground is hard like you say you can even get away with a half block under each upright. A half a block is much better then no block at all and in many cases is all you need.



This page might help with the leveling of an above ground pool.

Leveling an Above Ground Pool

And this page might help with the rest of your installation.

Above Ground Swimming Pool Installation