Locating Parts For Above Ground Pools

by Regina
(Channahon, Illinois, USA)

Jacuzzi Gibraltar Pool Missing Hold Down Plates

I bought a used pool..which is Jacuzzi brand and Gibraltar oval 15 X 24, but I am missing the hold down plates (which according to the person who took the pool down it did not have any).

So I am guessing that the person who installed this pool may not have used the plates. Any suggestions on how to get these plates since Jacuzzi is no longer making pools?? Thanks for any help you can give.


Hi Regina. That's an easy one. Make your own. Any flat, or close to flat metal you can lay over your brace channels will work just fine. One of the 3' wide metal roof panels run down each side of the pool would work just fine.

Doughboy Steel Wall Joint Needed

by Marguerite
(Clinton, Iowa)

Where can I get the wall joint for my Doughboy 16' by 4ft deep pool? We had it in storage and now can't locate the strip that joins the wall together. Any help is appreciated. Marg


Hi Marg. Doughboy parts are the easiest pool parts to locate. Any Doughboy dealer can order them for you, and the are all over the place.

Bottom Tracking Rim For Vogue Pool

We have a used 24 foot above ground Vogue Flair LX pool and need to replace the bottom rim. Does it need to be specific to the brand or will any brand rim work? We are having a hard time finding the rim from Vogue.




Parts Vogue
by: Anonymous

Call Plan It Recreation, they can order the parts. Located in Baytown tx

Top Rail and Cap Repairs

by Robert F. Begani
(New Buffalo, MI)

The plastic caps joining the top rails of the pool some are cracked and broken. No markings on the pool to determine the age, must be 15 or 20 years old. Is there any way of buying new caps? Or Repairing the caps? I have used white duct tape which is now unsightly. I have thought of a fiberglass overlay.

The rails are in need of a good coat of acrylic metal paint, if i could find an answer to the caps.

A friend says he thought there were pads you could purchase to cover the rails so people could rest on the rails.

Ideas? Thanks,

Bob

Hayward 24' Bottom Rail

Looking for replacement bottom rails for a 24' above ground Hayward pool.

Asahi Pool Top Seats

by BILL
(NY)

I have an Asahi pool model # 1161. It’s a 12’ x 24’ oval above ground pool bought in 2006. The top rails are steel and are rusted through. I have heard complaints about the manufactures supplier (asahiparts.com).

Can I replace them with resin top seats?



Hi Bill. I have no idea where you would find matching resin seats for that pool. You may want to read all of this post, it appears asahiparts is shipping.

Is asahiparts.com Still Active

Above Ground Pool Bottom Rails

by Meridith

I recently bought a used 15x30 above ground pool. Unfortunately 3 of the bottom rails are missing. I don't know the brand name but it was made in Japan. Help me please.


Hi Meridith. I feel very certain this is an Asahi Pool. There is a place to get parts and it appears they are still in business.

Is asahiparts.com Still Active

In Need of Pool Bottom Ring

by Christy K.
(Mechanicsville, Maryland)

I have an aluminum 24' round above ground pool. We have moved our pool from one location to our new house and we need the bottom metal ring. I think it's called a wall angle but I'm not sure. It's a metal ring that sits in the sand so the pool stays up. The one that we pulled out is corroded and we just need that piece but can't find it anywhere!

Home And Roam Top Rails

by Reginald Claypool
(Ijamsville, MD, USA)

I have a 18X33 oval Home and Roam leisure products above ground pool. Some of the top rails/post rails are rusting out and in need of replacement. This Co. is out of business and I am trying to find these parts. The pool is in great shape, otherwise. If anyone has a clue to getting actual replacement parts for this pool or other top plates that will work I would really appreciate the information. Thank you and you can contact me at eaglesongs@aol.com

Info on Parts for 2009 Vogue Pool

by Vickie
(Channelview, Tx)

We purchased a 2009 Vogue pool (15 x 30) oval, 52" deep, steel sided, from an individual awhile back. We were told we were getting all the boxes of materials/a complete pool. We haven't been able to reach the seller.

Our pool installers were in the process of preparing for installation & realized that we are missing a box that would contain:

Instructions
Metal straps
Bolts
Top part of posts (like a clamp that holds the wall -metal)
Metal sheets that sit on the bottom end of the bottom straps

Vogue has changed their name to Trendium Inc . We haven't had success locating someone in the Houston area that can assist us with obtaining these missing parts. Not sure if the parts have to be Vogue/Trendium, or if parts from another manufacturer would work. Any idea?

Thank you!
Vickie


Vogue Pools --> Trendium Inc.
by: Vickie

Hi! In order to try to find parts missing on a 2009 Vogue above ground pool...I contacted Vogue Pools (Canada). They
have changed the Company name to Trendium Inc.
I found a local dealer in Baytown, TX that could order missing parts. In case anyone else is local & need pool parts, here's a dealer that should be able to help you out:
Planitrecreation.com

Thanks!
Vickie