Pool Parts-Brand Unknown

I Have a chance to get an above ground pool for a great deal. Problem is the rubber parts between the rail caps are weathered badly and need replacement. Can anyone ID this manufacturer in hopes of find the parts?

prevattejt @ gmail.com

Hi.

I have seen this pool on occasion and am pretty sure it is a Hayward pool. They sold them for a couple years here in Arizona, maybe 7-8 years ago. I searched and could find nothing in the way of Hayward pools. I have not seen any since that time so I can only assume they quit making them.

The company that sold them was All American Pool and Patio in Phoenix Arizona.

Parts For My Above Ground Pool

My dad gave me a 18'x 4' above ground metal frame pool because the liner was tore. I bought a new liner for the pool, but I don't have all the bottom rails for the pool.

I also don't know where to look to buy these parts because I don't know who made the pool.

Hi.

It is fairly important to know the manufacturer of the pool so that you can get the right parts. Photos help us ID pools for you. You could also look over all the pieces and parts for a logo or something. Many times the walls are stamped with something, this would be at the top, near the connection point.

Other manufacturers stamp the top caps while others may do nothing at all. All liners have a logo of some sort on the backside of them, but not all liners are made by the same company that made the pool. The filters are usually marked, but again, not all are made by the same company that made the pool. For instance, Hayward filters are sold with any number of different pools.

Asahi pools are the most popular pools out there for not having labels of any kind and for having mismatched filters and liners. These pools are sold everywhere and are imported from Japan. Pool stores buy the pool only and then build their own package, usually with a SwimLine liner and a Hayward filter.

These pages might help also.

Asahi Above Ground Pools

Parts For Above Ground Pools

Above Ground Pool Parts

What Type of Pool

by Barbara
(Lufkin, tx)

I was told this was a Atlantis but local dealers want more info. Can anyone give me more info. I need a new bottom rail for a 24' x 48" pool.

Need Help Telling What Type Pool I Have

by PLEASE HELP
(SC)

Bought a house with a pool went to move pool and bottom rails crumbled. Need to know what type pool. Please help 3/4' rail...

Pool Name For Parts

by Brad
(Lansing, mI)

I have a used pool that I bought but don't know the manufacturer and I need some new parts. While searching I found a picture of the exact pool in your article named "Above ground pool wall buckling". by scott. any help in finding out the name or model number would be greatly appreciated.

Hi Brad

Here is that pool in case anyone can help.

I Need Help Finding Bottom Rail

Please help me identify who makes this bottom track for my pool.

Hi

Judging by the shape I would say it is either Doughboy or Lomart. You may want to find a local dealer of either of these two and take it in to them.

Pool Manufacturer ID

by Jamey Backus
(Beulah, ND)

I recently purchased a used 18' x 33' pool and I need a couple parts but I don't know the manufacturer of the pool. I have attached a couple pictures in the hopes that you can help me. Thanks

Looking for Top Track Clips

by David Bast
(Amarillo, TX, USA)

The attached pictures show what the clip looks like and the pool. I don't know the make and model of the pool or the age. 24' above ground. 48" wall. The clips I'm looking for snap into the top plate and secure the top plate to the top track and keep the uprights from leaning back away from the pool. The filter with the pool is an Aqua Leader.

Thank you for your help.

David Bast

Replacement Top Plate

by Shawn
(Fort Worth Texas)

I need a replacement top plate. I can't find manufacturer info or model #. Any help were I could buy one would be helpful. It does have a part#, it's 560402 but no dealer or website has any info. thank you

Bottom Rail/Upright Base Plate

by Christi
(SE Iowa)

We purchased a used pool and later realized we were missing the bottom base plate that connects two rails together and holds the upright as well. We can not find a name of the pool anywhere, and the previous owners are not being very helpful- imagine that! I have a picture of the piece we need, if anyone recognizes it and can help me to locate one, I would be forever grateful!!!

What Kind of Pool Do I Have

by Sara
(Upstate NY)

My grandmother gave me this pool, before she died. Unfortunately I couldn't ever find any paperwork on it. I have looked and looked online and no luck. We need a few parts for the pool, and their doesn't seem to be anyone whom can help..... Can someone please help me and tell me what kind of pool I have and where I could order parts. PLEASE

Need to Figure Out 24 Foot Pool Brand

by Anthony Carrier
(Maine)

i Have A Rather Unique Above Ground Pool That I Am Looking To Find Out The Brand In Order To Try To Find Parts That Have Recently Been Broken In The Harsh Maine Winter.

It Is A 24 Foot Pool. The Unique Feature Of This Pool Is That The Cove Angle Is Built Right Into The Bottom Track. As In Its All One Solid Molded Piece. The Bottom Track Is Approx 6 Inches Wide.

The Uprights Are Open Triangles And The Top Rails Shiplap Together Without Caps Over The Posts, Making The Top Rail Perfectly Smooth.

All Parts Are Plastic. Any Help On Determining The Brand Would Be Great.

Thanks.

Trying to identify Leslies Pool

by Janice
(Colubia, SC)

We purchased this pool in 2008 from Leslie's Pool. We need new top rails. I need to know the make and model to find the replacement rails. Leslie's store say they do not know. It is 10 x 33 x 52 above ground. It has 18 top rails in 3 different sizes. (10) 56-3/4", (4)58-1/4, (4)58-5/8

18' Above Ground Pool Rail

by Gary Wiltshire
(Newcastle, Ontario, Canada)

looking for replacement rails. can send picture if needed. outside length around 57 1/2 ' inside length about 55 1/2' and drilled holes 2' apart at each end.

Thank You

Identifying Pool Manufacture

by Richard
(Effingham , SC USA)

Hello, I was given an above ground pool that had already been disassembled. The pool is a 24 ' round with a 54" wall and the uprights and top plate are resin. The owner did not have paper work or remember where they got it or the manufacture. the number i found on the top plate is ... 31002 - 333 - 00000 . here are a couple of pictures.

Thanks Rich

Who manufactured this pool?

by Matt
(Orlando)

I'm having trouble identifying who manufactured this pool. Any help would be appreciated.

Parts I Need For Pool

by Kent Toalson
(Clemmons, NC)

I have an above ground pool that I purchased new approximately 7 years ago. I do not know the manufacturer of the pool and I have a part that I need.

The pool is 15 feet in diameter and 52" high. The part I need is a cap that covers the post along the pool ridge.

I've attached 4 pictures:

2 of the actual pool and 2 of the part I need. I need 2 of these caps.

Can you help? Do you need more information or pictures?

18x33 above ground pool - Wall replacement

by Russell Sprotte
(Appleton, WI, USA)

Is it possible to purchase just the wall to a pool. We had a problem with the wall where it folded up on us and it did not do any other damage.

We have a 18x33 above ground pool and it is 52 inches in height but we don't know the name of the pool because it was purchased before we moved in and there is no paper work on the pool. We have the liner for the pool which is called a boulder liner for the 18x33 foot pool, if you need any other information please contact me at rtmc1014@att.net

Looking for Replacement Top Rails for Pool

I am looking for replacement rails but am not sure of pool manufacturer.

Resin Pool Frames

by Rebecca
(Brockport, N.Y.)

Hi, everyone i have 2 resin pool frames. 1 is 27' the other is a 24'. The frames contain both upper and lower wall track. Both have uprights, top rails, and post upright and top rail covers. Both pools have complete frames. I am unsure of name brand of pools. I will be researching to figure this out. All parts are for sale. I believe the 24' is a aqualeader pool. The 27' pool might be a doughboy, not sure. Any help identifying is greatly appreciated.

Any Help on the Pool Maker?

by kim whitheill
(New Castle, PA)

I need the replacement bottom rail set for this. Its a 21' round, 52" pool that's about 10 years old. No known manufacturer I can find anywhere on it. the 2 parts with numbers are the top/bottom post plates (same part) and the top cap. Both part numbers start with a T. I did find the plate at teddy bear pools website but its out of stock and the parts dept hasn't answered my phone calls or emails for 2 days now. I was told by Inyo its a Trevi, its not after about 30 mins on the phone with Trevi and sending pics. any help would be appreciated :)

Aluminum Pool Wall

by Angie Clark

Hi I’m looking for the outer aluminum pool wall for my pool. It’s a 15x30x 48.

Looking to Identify the Brand and Model of My Pool

I am getting an older pool from my mother in law. She's not sure what brand it is. I'm looking to see if anyone can identify it and point me in the right direction to get parts. It's a l5 x 30 probably 20 years old and I need the bottom wall track and a few base plates. Any help would be appreciated. It was purchased at Budget Pools in Peabody MA.

Part #

by Melissa
(Ny)

What is the rail part number that goes with bottom plate #21116? I don't know what make the pool is but it's a 24'.