Top Caps for Pool

by Gray

I need some replacement white plastic top caps for a 24' round pool made by American Pool 'n' Spa Corp, model Alcazar pool.

I've tried calling a number for this company I found on-line, but the number was not working. Have they gone out of business? Do you know a company which might sell comparable parts?

Thanks, Gray

Hi Gray.

You could try using the link to Asahi pool parts and see if they have something that might fit. Aside from that you could do your best to find a local store that sells that brand. It's even possible to find an out of state store dealing in that pool and make a phone order. The parts could be shipped straight to your home.

Pages for pool parts.

Asahi Above Ground Pools

Parts For Above Ground Pools

Above Ground Pool Parts

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Resin Pool Caps

I have a 16 X 40 above ground pool with steel caps. Two years ago I had them striped down to bare metal and repainted, now the paint is coming off again.

I would like to change them to plastic so that they will not peel. Can I buy just the caps????

Hi.

I do not know of any pools that have the same type caps in steel and resin.

resin above ground pool rail and cap

Resin caps are usually made to fit over resin rails. There are a few that go over steel rails but I cannot think of any model that makes the same cap in resin and steel.

Steel top caps are much better and will last a lot longer. You could try sand blasting them and then painting them again with a good quality primer and then a finish enamel.

I have seen steel pool parts taken to an auto paint shop and come back looking like new.

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Making Pool Top Caps

My pool has metal uprights and top rail. The caps seem decorative. I was thinking about building my own replacement caps from composite decking boards with deep grooves on underside.

I plan to use table saw to cut off all but one of the ridges from the back of board - to form a lip to put toward outside of pool. Screw onto top plates with long metal screws.

Hi.

I can see no reason this would not work just fine. This could easily be a good alternative for those people owning pools with hard to find replacement parts.

I know of quite a few different brand pools that use resin or plastic parts for their decorative top caps. Once the parts are no longer available the pool owners are stuck with ugly pools.

I would love to see how these turn out, it could be the answer for a lot of above ground pool owners.

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Resin Cover(cap)

Delair Pool Cap

Delair Pool Cap

I have a Delair Symphony Series Vineyard pool and I'm trying to find the top and bottom resin cover(cap). The bottom resin cover(cap) has a part number T3526. I know Delair Company went out of business and the Wilbar International Company purchased some of the Delair product line. I'm trying to find replacement parts for this particular pool.

Comments for Resin Cover(cap)

Click here to add your own comments

Nov 28, 2014
Cap parts found
by: Steve

I found possible replacement caps for my pool at...

Teddy Bear Pools & Spas

41 East Street

Chicopee, MA 01020

(413) 594-2666 ext. 131

Parts@TeddyBearPools.com

www.teddybearpools.com


Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Top Caps and Skirts for Pool

by Ozzie
(Chicago Ridge, IL)

Bottom Part of Top Cap

Bottom Part of Top Cap

I'm looking to replace the top caps and skirts of the 18' round pool. I believe the pool is a doughboy. Not sure since the pool was there when we moved in. I have to replace 13 of them and the local pool store wants to charge me over $200.00. Is that a reasonable price or can I find them cheaper somewhere else? I've attached to photos of the ones I need to replace.

Thank you, Ozzie

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Dauphin Caps

by Jamie

I bought a used pool and need top caps. It looks like they say Dauphin on them, around 15yrs old. Where do I get them?

jamiesshearstyle@yahoo.com

Comments for Dauphin Caps

Click here to add your own comments

Jun 24, 2016
dauphin similar caps
by: Anonymous

I have the same caps. They come from a trevi pool.
I have been unable to find an exact match but these look close.

www.inyopools.com/Products7/24701352079920.html

I'm pretty sure based on measurements its the same front section with a shorter slide portion for the back.


Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Allegro Top Caps

by JC
(Ohio)

I have an Allegro 27 ft round pool that the top caps are dry rotting. Do you know where I can get replacement top caps? The pool is about 7 yrs old. thanks

Comments for Allegro Top Caps

Click here to add your own comments

Jun 12, 2018
Inyo Has Them
by: Inyo Rob

Inyo has Allegro top caps in stock. Gray and beige colors are available.

Gray www.inyopools.com/Products/24701352078838.htm


Beige www.inyopools.com/Products/24701352081335.htm


Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Plastic Top Caps

by Joe
(Mcdonough GA)

We bought a house that had an above ground pool already installed. I have no idea who manufactured it. A couple of the caps on top of the rail are broke. I have the part numbers but can't find it anywhere. They are P/N 361X24 which is the top piece and P/N 361X25 which is the lower piece. This is a two piece cap. Any ideas?

Comments for Plastic Top Caps

Click here to add your own comments

May 13, 2017
Same here
by: Geo

I have the same part and need to find some replacements. Who made this part, and where do I get another one?

Jan 20, 2021
361x24
by: Mimi

Did anyone find out what this pool is that this top cap number goes to??

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

AGP Top-Rail Connections

by Jeff Winship
(Oak Grove, MO)

Top Caps Side

Top Caps Side

Looking for a few connection sets for our used pool. Label on pool says:

Ovation Raised Pool Co

Wilkes-Barre, PA

It also has the Zodiac name on the label.

None of the local companies can seem to match them. These are rounded instead of square edges like most pools. I have sent some pics to help. If you have something that will match, I would like 6 sets.

Thanks
Jeff Winship

Oak Grove, MO

Hi Jeff

You might check this page for more help finding the Ovation Parts.

Ovation Pool Parts

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Pool Top Caps

Top Cap Assembly

Top Cap Assembly

Hello,
I am trying to find top caps for my above ground pool. The pool is approximately a 1998. I have not been able to find any markings as to who the manufacturer is. Appreciate any help you could provide.
Thanks, Jake

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.