Vogue Pool Parts

by Shirley
(Wisconsin)

Vogue Pool Liner Question

We purchased a house 11 years ago, in Wisconsin, that had an oval 18x33'- 48" high, flat bottomed, Vogue Pool that was installed in 1993. We need to replace the liner.

We were told by our local pool store that because it is a "Vogue" pool we need to have a liner specifically made for it, from somewhere on the East Coast and would cost us close to $1,000 which is way too much.

I need to know if we purchase another pool liner for our above ground pool that is beaded, will it work? Any help would be appreciated. I have called around to all area pool service people and they are unsure of the answer. It is getting frustrating.

Thanks, Shirley

Hi Shirley.

There are a few different types of beads, you just need to be sure you have the right one. The people at In The Swim are liner experts and could answer all your questions. They even make custom liners to fit any pool.

I would check with them to find out exactly what type of liner you need for your Vogue Pool.

Comments for Vogue Pool Parts

Click here to add your own comments

Aug 14, 2013
Vogue pool liners
by: Anonymous

We purchased and moved a used 15x30 Vogue pool. We replaced the liner with good brand virgin vinyl 20 ml thick liner and it worked fine. Be sure you check if you need overhang. Also, when you replace the liner, be certain to put a good pad down on top of the sand base, have a THICK cove of packed sand around the base to support the bottom seam, be sure the uprights are taped over with a thick tape and have a pad under the stairs. This will prevent stress on the liner and pre-mature damage. Keeping it covered from UV sun rays helps also; the new EPA rulings on content hurt the longevity of the liners. Hope this info is timely for you 8/14/2013

Jul 02, 2016
bolt kit
by: Anonymous

I have a 27ft x 52 ft Vague prima tango pool purchased in 2008. The pool was taken down after 2 yrs and the bolts for the pool were lost. I am trying to set it up and i can not find a bolt kit. Does anyone know where i could find them.

May 06, 2017
Locking screws
by: Anonymous

We are missing one of the locking screws to our vogue pool. Anyone know where to get a replacement?

Jun 13, 2017
Vogue EZ lock
by: Coral

I'm looking for replacement EZ Lock top rail screws that secure one top rail to the next on a Vogue Discovery LX above ground pool.

Mar 11, 2021
Vogue Flair Eloquence Top caps
by: Gary

I am looking for top caps for this pool. They are made of resin. Can you get these for us ?
Thank you,
Gary

Jun 29, 2022
Bottom channel
by: Janice Landis

HI am looking for a resin bottom channel, part 1295627. Any idea where I can find one?

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Vogue Wall Channel

by Tim Petsche
(Neenah WI)

I am in need of bottom wall channels for my 27' Vogue above ground pool. It is the Visa frame. The part number listed in the manual is 12541-27.
Any help would be appreciated.

Comments for Vogue Wall Channel

Click here to add your own comments

Mar 19, 2013
Vogue Pool
by: Anonymous

Vogue Pools are only made out of Canada now. They are called Trendium Pools. Go to Trendium.com and you can order any and all parts for your pool there. Good luck!

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Need Vogue Pool Wall and Bottom Channel

by Ellen
(Evans, GA)

We have a 24 ft. round Vogue above ground pool. The wall collapsed and cannot be repaired. Does anyone know where we can get one? We also need a bottom channel. Thanks!

Comments for Need Vogue Pool Wall and Bottom Channel

Click here to add your own comments

Jun 15, 2013
Need Vogue Pool and Bottom Channel
by: Anonymous

Hi, I have a 24' Vogue pool, walls, posts, bottom channel, no liner or filter system. Get ahold of me at trishmccoy89@yahoo.com and maybe we can help you out. Thanks

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Bottom Tracking Rim For Vogue Pool

We have a used 24 foot above ground Vogue Flair LX pool and need to replace the bottom rim. Does it need to be specific to the brand or will any brand rim work? We are having a hard time finding the rim from Vogue.

Parts Vogue

by: Anonymous

Call Plan It Recreation, they can order the parts. Located in Baytown tx

Comments for Bottom Tracking Rim For Vogue Pool

Click here to add your own comments

Mar 19, 2013
bottom tracking
by: Anonymous

I also needed a bottom rail for my Vogue Pool. They have been bought out by TRENDIUM pools out of Canada. Try their website, you can order any and all parts for your vogue pool there. hope this helps!

Jun 29, 2015
Aluminum wall for oval pool
by: Anonymous

looking for replacement wall for oval vogue pool 16x30 The rest of the pool is ok but the wall has rusted and split

Sep 10, 2019
25 yr old new era pool
by: joe pena

I have a 25 year old new era pool its been great but is aging the top rails are cracking and the walls are rusting do they still make any parts for this pool I have the part numbers. my email is Pena3822@gmail.com

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Vogue Pool Tool for Tightening Screws on Top Rail

by Stan
(Manchaca, Texas)

We have a Vogue above-ground pool, about 8 yrs old. It has locking "screws" that hold the sides of the pool together, and tighten the top rail onto the sides.

We lost the tool (wrench? key? widget?) that's used to tighten these "screws" down, and don't know how to find another one, or exactly what it's called.

The "screws" have a triangle-shaped indention's that the key inserts into, like the slot in the head of a regular screw.

Can anybody help?

Hi Stan.

I think you can find what you need at any Home Depot.

Vogue Pool Tool

by: Anonymous

Home depot has no clue what I am looking for, any one else have a clue where to find this tool?

Hi.

It was only a guess they would have what you need as I have never seen the Vogue Pool Tool.

It was not that many years ago that different pool manufacturers began coming up with all kinds of different ways of attaching top rails and cap covers. Home depot has a hundred different adapters for installing screws. I have had to go there many times to find just the right one to fit the pool I am working on.

Did you take the screw with you? Beyond that I have no idea what to suggest.

pool tool

by: Anonymous

I can't even find Vogue pools parts, any clue? I need that triangular tool to tighten down the top rail.

Comments for Vogue Pool Tool for Tightening Screws on Top Rail

Click here to add your own comments

Jun 22, 2014
Vogue tool
by: Anonymous

I took a 1" angle iron and pounded it to 60 degrees and ground it to fit the triangular opening

Sep 27, 2014
Vogue Pool Tool
by: Anonymous

Hi,
We have a Vogue 15x30 oval above ground pool that came with the house we bought 4 years ago. We need a new liner but don't have the triangular tool needed to disassemble the top rails. I read the comment above about making one from a metal angle. Would it be possible for you to email me a picture of it? My email address is vze1nn9y@verizon.net. Thanks so much for your help and time.

Jul 25, 2018
Vogue top rail tightening tool
by: Anonymous

Go can order it @ inyo pool

Jul 02, 2023
Triangle wrench
by: Anonymous

Were you ever able to locate the Truangle tool? Looking for one as well!

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Voque Bottom Rails

by LOLLY
(Eastern Ontario, Canada)

Hi there, we purchased a used 27 foot above ground pool by Vogue. Two of the bottom channel walls have rusted badly and need to be replaced. Do you have a place where we can purchase and / or order on line? The part numbers are: Omega part # 12541-27 visa part # is also 12541-27. Any assistance you could provide would be greatly appreciated. Cheers!

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Info on Parts for 2009 Vogue Pool

by Vickie
(Channelview, Tx)

We purchased a 2009 Vogue pool (15 x 30) oval, 52" deep, steel sided, from an individual awhile back. We were told we were getting all the boxes of materials/a complete pool. We haven't been able to reach the seller.

Our pool installers were in the process of preparing for installation & realized that we are missing a box that would contain:

Instructions

Metal straps

Bolts

Top part of posts (like a clamp that holds the wall -metal)

Metal sheets that sit on the bottom end of the bottom straps

Vogue has changed their name to Trendium Inc. We haven't had success locating someone in the Houston area that can assist us with obtaining these missing parts. Not sure if the parts have to be Vogue/Trendium, or if parts from another manufacturer would work. Any idea?

Thank you! Vickie

Vogue Pools --> Trendium Inc.

by: Vickie

Hi! In order to try to find parts missing on a 2009 Vogue above ground pool...I contacted Vogue Pools (Canada). They have changed the Company name to Trendium Inc.

I found a local dealer in Baytown, TX that could order missing parts. In case anyone else is local & need pool parts, here's a dealer that should be able to help you out:

Planitrecreation.com

Thanks! Vickie

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Vogue Above Ground Top Rails and Caps 1997 Elite Model

by Patty
(Austin, TX)

Does anyone know where I can purchase replacement top rails and caps for my 1997 Vogue Elite Above Ground Pool? Damaged in hail storm and can't find the parts.

Comments for Vogue Above Ground Top Rails and Caps 1997 Elite Model

Click here to add your own comments

Mar 05, 2014
Vogue Top Rails
by: Anonymous

Vogue Pools were bought out by TRENDIUM pools out of Canada. I had to order parts & I will forwarn you....it's a nightmare, but I finally did get them. Go online & look up Trendium Pools in Canada. Start there. Good luck!

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Vogue Pool Part

by Frank
(Port Huron, MI)

I have a 18' vogue Performa Siloiette and I need to replace a couple joiner plates.

Comments for Vogue Pool Part

Click here to add your own comments

Apr 28, 2013
Vogue New Walve Pool
by: Paul

We have a 24' round vogue new wave pool 52" tall. It is 10 years old. Winter snow weight did considerable damage. Dealer quote includes obvious parts to be replaced such as bead liner, 5 top seats, 4 uprights which were cracked. The pool wall was only slightly damaged, rippled not kinked but they want to sell us a new one for almost a grand. A guy who fills pools tells us that he has filled pools with more side wall damage that ours without a problem.

Any help would be appreciated.

Hi Paul.

I would fix the wall. Reinforce if needed but replacing is a little extreme.


Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Seat Cap

by Janice
(Pennsylvania)

Looking for seat cap for old Vogue pool- Flair LX model.

Part number in manual is 22150(inside piece) and 22110(outside piece)

Comments for Seat Cap

Click here to add your own comments

Jul 28, 2019
Cap
by: Vaughn Weber

Looking for the same thing. Interested if you find a replacement.

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

The Good Uncle


(Hallstead, PA, USA)

Our neighbor gave us a Vogue Symphony 18' round pool for our small adopted children. I believe it is from 1994, and some of the bottom rails are rusted through. Also, the plastic inside the top rails is kind of brittle. Where can I find replacement parts?

Comments for The Good Uncle

Click here to add your own comments

May 24, 2015
Coping strips
by: Sherri

I believe the top plastic pieces you are referring to are the coping strips to hold the liner on. I just ordered them for my pool on amazon. They are not costly at all. Sorry can't help with the Morton rail. Good luck.

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Top Cap for a Vogue Above Ground Pool

by Deborah
(Buffalo, NY)

I need to replace one top cap for our round, 24' pool. The number on the underside of the cap is, 22110B. This is a Vogue pool installed in 1996. Can I still get one and where?

Comments for Top Cap for a Vogue Above Ground Pool

Click here to add your own comments

Jul 28, 2019
Cap
by: Vaughn Weber

I'm looking for the same thing. Please update if you find a solution. Thx

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Pool Top Rails

by Brian
(Baldwinsville New York )

Vogue Top Rails

Vogue Top Rails

I'm looking for top rails to an older Vogue 24' round above ground pool. They are 53 1/4" at the longest point and the screw holes are 1 1/2 " apart. They are a little over 6 " wide and made of steel. I need 10 of them. Here are some pictures.

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Voque Top Rails

by Larry
(New York)

Voque Top Rail

Voque Top Rail

I have a 15 x 30 oval Vogue Forum swimming pool. It's about 15 years old. I need 2 top rails which are 42 1/8 inches long. Any help out there?. Thank you in advance

Larry

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Vogue Ovation 18ā€™ Round

Iā€™m looking for top rails for an 18ā€™ foot round Vogue Ovation pool.

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Looking for Parts and instructions for Vogue New Wave Pool

by Marceli
(Mendon, MA)

Vogue New Wave Pool

Vogue New Wave Pool

I would like a contact to find parts, and the manual for installing Vogue New Wave pool. Thank you in advance.

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Vogue Revelation 18x33

by Erinn Kern
(Bethlehem, pa, usa)

I have a 2nd hand Vogue Revelation 18x33' by 54". Missing 2 steel bars part 11825. Missing 60" steel strap part 20560. Missing one bottom plate CG761-20852.

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.

Used AGP Pool I Bought

by Kim
(Mantua,Ohio Portage County)

Pool I found on your website.

Pool I found on your website.

I just bought a used Vogue pool, that is all I know about it. I'm looking to find the Model name, what year it was made, a manual for it and the size. I see on your website you have a picture of the exact pool I bought. Can you help me out with any information?

Click here to post comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Above Ground Pool Parts.